Maxillofacial

Uses and Generalities:

Correction of defects of the Temporomandibular Joint (TMJ) as Arthritic Diseases, Anchilosis, Condilar Reabsorb, Avascular Necrosis, Failed Procedures, Trauma, Genetic Diseases, etc. 

These solutions are recommended for cases of traumatic, post-traumatic reconstructions & oncological resections that may include temporomandibular joint (TMJ) replacement, the correction of defects due to illness, trauma or aesthetic.

Other solutions include surgical planning for surgeries of the Maxilla and Mandible that result in patient specific cutting guides. 

CATEGORIES

Uses and Generalities:

This solution is recommended for the correction of the temporomandibular joint (TMJ) defects such as: Arthritic diseases, ankylosis, condylar resortion, avascular necrosis, failed procedures, trauma, genetic diseases, etc.

 

This solution includes the mandibular and maxillary cutting guides  necessary to perform the surgery according to the case planning.

 

The implant is custom made according to the pathology of the patient.

Components:

Glenoid fossa component: The implant would consist of a titanium assembly and ultra-high molecular weight polyethylene (UHMW). The fixation would be done with 2.0mm screws and a minimum of 4 screws would be required.

 

Condylar component: The implant would consist of a titanium alloy (TI6Al4V). The fixation would be done with 2.5mm screws to the mandible and minimum 4 screws would be required.

TMJ REPLACEMENTS

 

Reconstruction with free flap of microvascularized fibula:

This solution is recommended for cases of traumatic, post-traumatic reconstructions & oncological resections that may include temporomandibular joint (TMJ) 
replacement.

The solution includes:

1. Detailed virtual surgical virtual planning of the specific case for the patient, where the location and length of the screws are suggested for fixation.

2. Complete custom anatomical titanium plates or independent 
titanium mini plates that are tailored to the surgical planning. The 
thickness of the plates can be low profile at 1.6mm or lower 
depending on the discretion of the surgeon. Fixation of these plates is done with 2.0mm or 2.5mm screws, which are included.

3. Plastic anatomical models, anatomic cutting guides for mandibular and/or maxillary  resection, anatomical cutting guides for the fibula graft.

4. Specific instrumentation system for the solution that includes the saws.

Reconstruction with iliac crest:

This solution is recommended for cases of traumatic, post-traumatic reconstructions & oncological resections or defects smaller than 5 cm in the Iliac Crest. 

The solution includes:

1. Detailed virtual surgical planning of the specific case for the patient, where the location and length of the screws are suggested for fixation.

2. Anatomical plates and patient-specific surgical plates made of titanium. The thickness of the plate can be low profile at 1.6mm or lower depending on the discretion of the surgeon. The fixation of these plates is done with 2.0mm or 2.5mm screws, which are included.

 

3. Anatomical plastic models, anatomical cutting guides for mandibular and/or maxillary resection, anatomical cutting guides for the iliac crest graft.

 

4. Specific instrumentation system for the solution that includes the saws.

 

5. Technical support during surgery.
 

Reconstruction with custom plates for small defects:

This solution is recommended for cases of traumatic, post-traumatic reconstructions & oncological resections or defects smaller than 5 cm. This plate is considered a prosthetic replacement since no type of flap or graft is used to restore bone continuity.

The solution includes:

1. Detailed virtual surgical planning of the specific case for the patient, where the location and length of the screws are suggested for fixation.

2. Anatomical plates and patient-specific surgical plates made of titanium. The thickness of the plate can be low profile at 1.6mm or lower depending on the discretion of the surgeon. The fixation of these plates is done with 2.0mm or 2.5mm screws, which are included.

3. Anatomical plastic models, anatomical cutting guides for mandibular and/or maxillary resection.

4. Specific instrumentation system for the solution.

5. Technical support during surgery.

 

Uses and Generalities:

This solution is recommended for the correction of defects due to illness, trauma, or aesthetics.

 

The implants are manufactured with materials such as 
Polyether ether (PEEK), Titanium (printed or machined) and Poly Methyl
Methacrylate (PMMA).

 

The fixation of the implants is done with 1.5mm or 2.0mm screws.

MAXILLOFACIAL SPACERS

1/1
 

MAXILLOFACIAL MIDDLE THIRD RECONSTRUCTION

1/8

Uses and Generalities:

This soltuion is recommended for the correction of defects due to illness, 
trauma or aesthetic.

Implants are manufactured in materials such as Polyether ether (PEEK), Titanium (printed or machined) and Polymethyl methacrylate (PMMA).

 

The fixation of the implants is done with 1.5 or 2.0mm screws.

Defect Example:

Complexities include the Orbital floor and/or orbit flange, zygomatic arch, among others.

 

ORTHOGNATHIC PLANNING

Uses and Generalities:

This solution is recommended to plan surgeries for the corrections of the maxilla and mandible.

 

They can be monoaxially or bimaxillary surgeries. Orthognathic virtual planning would be conducted in order to create a custom occlusion splint. If the surgery is bimaxillary, an intermediate splint and final splint would also be designed to help with proper placement of the maxilla and mandible. 

 

The solution can be offered (for a different price) with 3D printed or machined 
anatomical plates.

We have 2 types of solutions:

Virtual planning that includes just the splints.

 

Orthognathic surgery package that includes virtual planning with splints and fixation materials needed during surgery.

 

 

Learn about our Materials

QUICK LINKS

CONNECT WITH US

  • Facebook
  • Twitter
  • Instagram
  • Grey LinkedIn Icon

FIND US

TECHFIT Digital Surgery

1511 Aviation Center Pkwy

Suite 220H 

Daytona Beach, FL 32114

render-Cámara 2.115